Icom Inc. has been a world leader in radio communications for over 50 years. Icom continues to lead the industry with the development of digital technologies to provide the future in radio communications to the world. Icom was proud to be the first manufacturer to offer dPMR products to the market.
ICOM
dPMR Product Showcase
IDAS dPMR Hand Portables, Mobile Radios, Repeaters and Applications
Tier 1: dPMR446 TS 102 490 Compliant Products-LICENSE FREE RADIOS：
IC-F29DR2:
| Key Features |
|---|
| Pan-European License-Free Communication |
| Digital PMR 446 (32 channels) plus analogue PMR 446 (16 channels) available |
| dPMR446 mode complies with ETSI TS 102 490 |
| IP67 Waterproof and Dust-tight & MIL-STD-810-G rugged |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| Common ID code for group communication |
| VOX for hands-free operation |
| Voice Announcement Function |
| 12 types of Ring Tone |
| 26 hours operating time |
| Supplied with BC-213 Rapid charger/BC-123SE/SUK AC Adaptor/BP-280 Battery pack/MB-133 Belt clip |
Tier 1: dPMR446 TS 102 490 Compliant Products-LICENSE FREE RADIOS：
IC-F29DR:
| Key Features |
|---|
| Pan-European License-Free Communication |
| Digital PMR 446 (16 channels) plus analogue PMR 446 (8 channels) available |
| IP67 Waterproof and Dust-tight & MIL-STD-810-G rugged |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| Common ID code for group communication |
| Voice Announcement Function |
| 12 types of Ring Tone |
| 26 hours operating time |
Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:
IC-F3400DPT/DPS/DP (VHF)/IC-F4400DPT/DPS/DP (UHF)
| Key Features |
|---|
| Small, Slim and Smart. Three front panel variants to choose |
| dPMR Mode 1, 2 and 3* (*requires license upgrade) compatible with mixed digital/analogue mode operation |
| IP68 Waterproof and Dust-tight & MIL-STD-810-G rugged |
| Integrated GPS receiver |
| Color LCD and User-friendly Interface via “flat-tile” keypad/ Multi-language profiles |
| 1000 channels expandable to 4000 channels (with license key) |
| Over-the-Air-Alias (OAA)/Over-the-Air-Programming (OTAP) |
| Wireless Hands-Free Operation with Bluetooth® |
| Digital Voice Recording, data storage with SDmicro card |
| AES/DES Encryption with Over-the-Air-Rekeying (OTAR) |
| Active Noise Canceller/Audio Equalizer |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| Motion sensors and various emergency modes like man-down or lone worker |
| License Key for upgrades to trunking or adding other features |
| System Configuration File allows programming of common system parameters in Mode 3 systems |
Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:
IC-F3262DT/DS (VHF)/IC-F4262DT/DS (UHF)
| Key Features |
|---|
| dPMR Mode 1, 2 and 3 compatible with mixed digital/analogue mode operation |
| Compact and IP67 Waterproof & Dust-tight & MIL-STD-810-G rugged |
| 512 channels with 128 zones |
| Dot-matrix, multi-function LCD |
| Integrated GPS receiver and man down function (Depending on the transceiver version) |
| 800mW loud audio with BTL amplifier |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| 14-pin accessory connector with BTL amplifier output |
| Built-in 5-Tone/CTCSS/ DTCS / BIIS 1200 signaling (FM mode) |
| Mode dependent scan/Priority scan |
| Lone worker function |
| Power on password |
| Escalating alarm |
| 8 DTMF autodial memories |
| Busy channel lockout, repeater lockout and time-out-timer |
| Surveillance function |
Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:
IC-F3202DEX (VHF)/IC-F4202DEX (UHF) ATEX Radios
| Key Features |
|---|
| dPMR™ Mode 1 and 2 compatible with mixed digital/analogue mode operation |
| IECEx/ATEX Intrinsically Safe Radios with highest level ratings for use in hazardous environments (Mining, Gas and Dust) |
| 16 channels/1W output (as per ATEX requirements)/ Up to 21 hours of operation |
| Distinctive blue, low resistivity casing eliminates need for case when used in hazardous environments |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| Compact and IP67 Waterproof & Dust-tight & MIL-STD-810-G |
Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:
IC-F1000D (VHF)/IC-F2000D (UHF)
| Key Features |
|---|
| dPMR™ Mode 1 and 2 compatible with mixed digital/analogue mode operation |
| Slim, compact and lightweight |
| Motion detection, stationary detection, man down and lone worker functions |
| IP67 waterproofing and dust-tight protection & MIL-STD-810-G rugged |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| Long-lasting battery life |
| Channel announcement function |
| Optional GPS Speaker-Microphone |
| DTMF autodial memories |
| BIIS PTT ID call and emergency call |
| Surveillance function |
| Escalating alarm |
| VOX capability for hands-free operation |
| Red emergency switch on the top panel |
Tier 2: dPMR TS 102 658 Compliant Products-PORTABLE RADIOS:
IC-F3102D (VHF)/IC-F4102D (UHF)
| Key Features |
|---|
| dPMR Mode 1 and 2 Compatible with mixed digital/analogue mode operation |
| 16 memory channels /3-color LED |
| Built-in 2-Tone / 5-Tone / CTCSS / DTCS signaling (FM mode) |
| Channel announcement function |
| Optional GPS speaker-microphone, HM-171GP |
| Operating time: 16–17.5 hours* (approx. with BP-265 battery pack) |
| 800mW (typ.) loud speaker audio |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| Internal VOX capability for hands-free operation |
| IP54, dust-protection and water resistance & MIL-STD-F rugged |
| Lone worker function/Surveillance function |
| DTMF autodial |
| Busy channel lockout, repeater lockout and time-out-timer |
| Simple operation for instant communication |
| Radio kill, stun and revive function (RX only) |
| BIIS PTT ID transmission (For the analogue FM mode) |
With a combination with optional separation kits, COMMANDMIC and separation cables, three types of controller configurations are available to suit almost any application or installation that may be required. The intercom function is available between controllers and/or COMMANDMIC.
Icom-Detached Controller
Icom-Dual Head Controller
COMMANDMIC™ and Detached Controller
Tier 2: dPMR TS 102 658 Compliant Products-MOBILE RADIOS:
IC-F5400DP/DPS (VHF)/IC-F6400DP/DPS (UHF)
| Key Features |
|---|
| dPMR Mode 1, 2 and 3*(*requires license upgrade) compatible with mixed digital/analogue mode operation |
| Two display variants to choose from |
| Integrated GPS receiver (separate GPS antenna required) |
| IP55 Jet water and Dust protection. MIL-STD-810-G rugged |
| Color LCD and User-friendly Interface / Multi-language profiles |
| 1000 channels expandable to 4000 channels (with license key) |
| Over-the-Air-Alias (OAA)/Over-the-Air-Programming (OTAP) |
| Wireless Operation with Bluetooth® |
| Digital Voice Recording, data storage with SDmicro card |
| AES/DES Encryption with Over-the-Air-Rekeying (OTAR) |
| Active Noise Canceller/Audio Equalizer |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| License Key for upgrades to trunking or adding other features |
| System Configuration File for programming common system parameters in Mode 3 |
| Optional COMMANDMIC™ / Multiple configurations for flexible installation |
Tier 2: dPMR TS 102 658 Compliant Products-MOBILE RADIOS:
IC-F5062D (VHF)/IC-F6062D (UHF)
| Key Features |
|---|
| 512 channels with 128 zones /dPMR Mode 1, 2 and 3 compatible with mixed digital/analogue mode operation |
| Built-in 5-Tone/CTCSS/ DTCS / BIIS 1200 signaling (FM mode) |
| Detachable front panel with optional RMK-3 and separation cable |
| Surveillance function / Escalating alarm /Power on password / Lone Worker function |
| IP54 dust-protection and splash resistance (Only controller and RMK-3) |
| MIL-STD-F rugged construction |
| Mode dependent scan / Priority scan |
| Busy channel lockout, repeater lockout and time-out-timer |
| Radio kill, stun and revive function |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
Tier 2: dPMR TS 102 658 Compliant Products-MOBILE RADIOS:
IC-F5122D (VHF)/IC-F6122D (UHF)
| Key Features |
|---|
| dPMR Mode 1 and 2 compatible with mixed digital/analogue mode operation |
| 128 Channels with 8 zones |
| 8-character alphanumeric display |
| Built-in 2-Tone / 5-Tone / CTCSS / DTCS signaling (FM mode) |
| D-Sub 25-pin accessory connector with optional OPC-2078 |
| 4W (typical) front mounted speaker |
| MIL-STD-F rugged construction |
| 8 DTMF autodial memories |
| Surveillance function/Radio kill, stun and revive function (RX only) |
| BIIS PTT ID transmission (FM mode) |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
Single Site (4 Channels × 1 Site Model)
Multi-site (6 Channels × 3 Site Model)
Region Wide Network (Up to 256 Sites Multi-region Connection)
Tier 2: dPMR TS 102 658 Compliant Products – dPMR Mode 3 TRUNKING CONTROLLER:
IC-FC5000E
| Key Features |
|---|
| Dedicated control channel |
| Up to 32 sites multi-site trunking with CS-FC5000SCS System Control Software |
| Up to 256 site multi-site trunking with CS-FC5000SCS System Control Software |
| Four channel activation key is supplied with the IC-FC5000E |
| Subscriber registration |
| CS-FC5000 web based management software allows connection of multiple clients |
| CS-FC5000 supports localized language for system labels |
| Firmware update over an IP network |
| Remote reboot of the trunking controller over an IP network |
| Repeater anomaly detection and alert |
| A traffic channel can be configured as a secondary control channel |
The IC-FR5100/FR6100 series has an internal space for installing an optional RF unit, UR-FR5100/UR-FR6100 series. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.
Tier 2: dPMR TS 102 658 Compliant Products-REPEATERS:
IC-FR5100/H (VHF)/IC-FR6100/H (UHF)
| Key Features |
|---|
| dPMR Mode 1 and 2 compatible with mixed digital/analogue mode operation |
| dPMR Mode 3 compatible when used with IC-FC5000E controller |
| 12-digit dot-matrix display and 32 memory channels |
| 19-inch rack mount design, 2U height low profile design |
| Multiple CTCSS, DTCS tone and digital channel code decode |
| Output at 100% duty: IC-FR5100/FR6100: 25W/IC-FR5100H/FR6100H: 50W |
| ±0.5ppm high stability oscillator |
| “2 channel in 1 box” configuration (Optional UR-FR5100/UR-FR6100 required) |
| Outstanding Audio Quality: AMBE+2™ dPMR standard vocoder |
| 5-Tone and DTMF encoder/decoder (5-Tone is for FM mode) |
| D-Sub 25-pin connector |
| Built-in inversion voice scrambler and optional UT-109R/UT-110R for higher security in FM mode |
| CW ID transmitter |
| IC-FR5200H/IC-FR6200H: High power, full duty heat sink chassis version (Export version only) |
Other dPMR Related Products:
RS-MGR2 Remote System Manager Software
| Key Features |
|---|
| The RS-MGR2 is a system management software tool for monitoring the operating status of dPMR Mode 3 trunking sites. Install the software in a server PC and client users can be accessed through a WEB browser. The RS-MGR2 provides real-time monitoring, system alerts and log search functions for the dPMR Mode 3 system. |
| Multi-Client: The RS-MGR2 allows creating up to 20 user accounts and giving three types of access rights to each user account. |
| Multi-lingual Setting: By creating a translation table, menu items can be customized to be shown in localized language. The language is selectable by user account. |
| E-mail Alert: The user can select error factors beforehand, and an e-mail alert can be sent to the user if any of the error factors occur or clears. |
| Real time monitoring: Repeater View, Repeater Status, Repeater Condition and System Connection can be monitored within the system. |
| Log Functions: Registration Log, Communication Log, Traffic Log and Search Log can be searched and downloaded with extensive filter settings. The collected log data can be downloaded in CSV format with a ZIP archive. |
Other dPMR Related Products:
VE-PG3 RoIP Gateway
| Key Features |
|---|
| The VE-PG3 is designed to enhance the communication coverage of a radio network and the convenience of radio usage by leveraging IP networking technology. The VE-PG3 has two modes; converter mode and bridge mode. The converter mode converts radio audio into VoIP/analog phone calls and allows interconnection between connected equipment. |
| Interconnect between IDAS™ dPMR™ Mode 2, analogue radio system and IP Advanced Radio System |
| Interconnects analogue radio to IP phone/analogue phone system |
| Interconnects dPMR Mode 2 and/or analogue radio to IP phone/analogue phone system |
| Direct dialing from radio user is possible (Limited to radios with DTMF capability) |
| Interconnects between analogue radio sites over the IP network |
| Site-to-multisite radio communication (IP multicast network required) |
| Mixing audio function |
| Cross band, cross category (e.g. dPMR UHF to air band VHF) connection |
| Option RC-FS10 software for virtual PC dispatch station |
| Public address system, siren, warning light and external equipment can be connected to the VE-PG3 |
| The virtual serial port function for remote control connected radios or equipment from a PC over the IP network |
| IP router function: PPPoE/IPv6 bridge, NAT, dynamic DNS, VPN pass through, IP filter, SNMP and SYSLOG |
| USB flash drive connection for firmware updates and data backup |
Other dPMR Related Products:
SR-VPN1 VPN Router
| Key Features |
|---|
| The SR-VPN1, VPN router creates a VPN tunnel over the Internet and assists in building a Radio over IP communication network with easy configuration. Icom offers a variety of products which merge a radio system with an IP network and the SR-VPN1 is the best match VPN router for these Icom RoIP products. |
| Up to 32 VPN IPsec VPN tunnels (3DES, AES-128, AES-192 or AES-256) |
| IPsec wizard focuses on the basic setting items for a VPN connection, and provides simple step-by-step instructions |
| IPv4 multicast routing for VE-PG3 |
| High-speed 1000BASE-T gigabit Ethernet connection |
| 4 gigabit LAN ports with switch function |
| Automatic MDI/MDI-X function detects the required cable types |
| Dual WAN ports (main/sub) for automatic failover |
| USB flash drive connection for firmware updates and data backup and restore |
| Firmware updates also can be made via Internet connection |
| Supports SNMP and Syslog messages for network monitoring (An xDSL or FTTH modem is separately required for Internet connection) |
Other dPMR Related Products:
RC-FS10 Remote Communicator
| Key Features |
|---|
| The RC-FS10 is a remote communicator software for IDAS™ dPMR conventional and a VE-PG3 connected analogue radio system. It creates a virtual radio/simple dispatch station on a Windows®-based PC with the CT-24 digital voice converter and a microphone/speaker. |
| Up to 8 different IDAS or VE-PG3 systems can be programmed |
| Up to 40 function buttons are programmable, including individual call, group call, selective call, all call, status call, status polling, and so on |
| Caller ID/alias name, called ID/alias name and call type information are displayed on the ANI area for easy recognition |
| SDM (short data message), status message and DTMF code can be sent and received |
| Communication log is displayed and can be stored |
| The CT-24 digital voice converter is a USB device which converts microphone audio to the AMBE+2™ codec for the IDAS™ dPMR radio system. The remote communicator software will not work if the CT-24 is not connected. |
Questions? Feel free to get in touch ...
Membership info or technical data and all else in between; we're happy to answer your queries ...
About us
The dPMR Association was established in 2007 and provides a forum for interested parties to contribute their expertise.
Quick links
Subscribe
Get the latest updates